Canon 5169B003 User Manual Download Page 74

Page: 74 / 324

The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.

Set the Mode Dial to <

Focus the subject.

Look through the viewfinder and aim
the selected AF point over the
subject. Then press the shutter button
halfway.

The dot inside the AF point achieving
focus lights briefly in red, and the
focus confirmation light <

> in the

viewfinder’s bottom right lights (with
One Shot AF).

The shutter speed and aperture will
be set automatically and displayed in
the viewfinder.

Check the display.

A standard exposure will be obtained
as long as the shutter speed and
aperture display do not blink.

Take the picture.

Compose the shot and press the
shutter button completely.

: Program AE

Summary of Contents for 5169B003





































































































































































































































































































































Search results

Summary of Contents for 5169B003

Reviews:

Related manuals for 5169B003

Brands by name

Popular brands

Canon 5169B003, User Manual

Search results

Summary of Contents for 5169B003

Reviews:

Related manuals for 5169B003

Brands by name

Popular brands