Canon 5116B003 Instruction Manual Download

Page: 64 / 204

Video

2 Select the story you want to delete.

Drag your finger right/left to bring the desired story to the front.

3 Delete the story.

* Touch [Stop] to interrupt the operation while it is in progress. Some scenes may

be deleted nevertheless.

IMPORTANT

• Be careful when deleting recordings. Once deleted, scenes cannot be

recovered.

• Deleting a story permanently deletes all the scenes it contains.
• When deleting scenes, scenes will be removed from the date index

screen and from any stories in the gallery they may have belonged to,
regardless of the method used to delete them.

• Save copies of important scenes before deleting them (

134).

• Observe the following precautions while the ACCESS indicator is on or

flashing (while scenes are being deleted).
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.

NOTES

• To delete all movies and make all recordable space available again you

may prefer to initialize the memory (

44).

[Story Details]

[Edit Story]

[Delete Story]

[Yes]*

[OK]

COP

Summary of Contents for 5116B003













































































































































































































Search results

Summary of Contents for 5116B003

Reviews:

Related manuals for 5116B003

Brands by name

Popular brands

Canon 5116B003, Instruction Manual

Search results

Summary of Contents for 5116B003

Reviews:

Related manuals for 5116B003

Brands by name

Popular brands