manualshive.com logo in svg

Canon 5116B003, Instruction Manual

The Canon 5116B003 Instruction Manual is a comprehensive guide for operating and maximizing the potential of your Canon device. This helpful manual provides step-by-step instructions and troubleshooting tips to ensure optimal performance. Download this free manual from manualshive.com to unlock the full potential of your Canon 5116B003 product.

Share
Download
background image

Additional Information 

Š

 181

Long-term storage 

• Store battery packs in a dry place at temperatures no higher than 30 °C 

(86 °F). 

• To extend the battery life of the battery pack, discharge it completely 

before storing it.

• Charge and discharge all your battery packs fully at least once a year.

Remaining battery time

If the remaining battery time displayed is not correct, charge the battery 
pack fully. Still, the correct time may not be displayed after a large number 
of repeated uses, if a fully charged battery pack is left unused, or if a bat-
tery pack is used for long periods of time in high temperatures. Use the 
time shown on the screen as an approximation.

Regarding the use of non-Canon battery packs

• For your safety, battery packs that are not genuine Canon battery packs 

will not be charged even if you attach them to this camcorder or to the 
optional CG-800 Battery Charger.

• We recommend using genuine Canon battery 

packs bearing the Intelligent System mark.

• If you attach to the camcorder battery packs 

that are not genuine Canon battery packs, 

 will appear and the 

remaining battery time will not be displayed.

Memory Card

• We recommend backing up the recordings on the memory card onto 

your computer. Data may be corrupted or lost due to memory card 
defects or exposure to static electricity. Canon shall not be liable for lost 
or corrupted data.

• Do not touch or expose the terminals to dust or dirt.
• Do not use memory cards in places subject to strong magnetic fields.
• Do not leave memory cards in places subject to high humidity and high 

temperature.

• Do not disassemble, bend, drop, or subject memory cards to shocks 

and do not expose them to water.

COP

Y

Summary of Contents for 5116B003













































































































































































































Reviews:

No comments

Related manuals for 5116B003

Panasonic HDC-HS300P/PC Operating Instructions Manual preview
HDC-HS300P/PC
Brand: Panasonic Pages: 183
Panasonic HDC-HS250P/PC User Manual preview
HDC-HS250P/PC
Brand: Panasonic Pages: 166
Panasonic Palmcorder PV-DLT9 Operating Instructions preview
Palmcorder PV-DLT9
Brand: Panasonic Pages: 4
Panasonic AW-PH405 Specifications preview
AW-PH405
Brand: Panasonic Pages: 2
Panasonic AW-LZ14ST55 Instructions preview
AW-LZ14ST55
Brand: Panasonic Pages: 2
Panasonic Palmcorder PV-LCD35 Operating Instructions Manual preview
Palmcorder PV-LCD35
Brand: Panasonic Pages: 8
Panasonic AWVF80P - ELECTRONIC VIEW FINDER Operating Instructions Manual preview
AWVF80P - ELECTRONIC VIEW FINDER
Brand: Panasonic Pages: 12
Panasonic AWVF64N - 4" VIEWFINDER Operating Instructions Manual preview
AWVF64N - 4" VIEWFINDER
Brand: Panasonic Pages: 12
Panasonic AWVF80 - VIEWFINDER Operating Instructions Manual preview
AWVF80 - VIEWFINDER
Brand: Panasonic Pages: 12
Panasonic AW-PB605P Operating Instructions Manual preview
AW-PB605P
Brand: Panasonic Pages: 16
Panasonic BT-LT80W Menu Information preview
BT-LT80W
Brand: Panasonic Pages: 20
RCA Small Wonder EZ2120 series User Manual preview
Small Wonder EZ2120 series
Brand: RCA Pages: 34
RCA Small Wonder EZ2050 series User Manual preview
Small Wonder EZ2050 series
Brand: RCA Pages: 34
JVC GR-SXM68AC Schematic Diagram preview
GR-SXM68AC
Brand: JVC Pages: 4
JVC GR-SXM750 Instructions Manual preview
GR-SXM750
Brand: JVC Pages: 32
JVC GR-SXM745 Instructions Manual preview
GR-SXM745
Brand: JVC Pages: 32
JVC GR-SZ3000 Instructions Manual preview
GR-SZ3000
Brand: JVC Pages: 50
JVC GR-SXM38U Instructions Manual preview
GR-SXM38U
Brand: JVC Pages: 24

Brands by name

Popular brands

Load more brands