Canon 4K6021Z, User Manual

Page: 50 / 216

Convenient Projection Features
48
Projecting a Test Pattern from the Menu
Even without any input signals, the projector can project a test pattern. Test
patterns can be projected during installation to check how the projector is installed.
For details on projecting test patterns, see “Test pattern” (
P138 ) or “Adjustment
Using a Test Pattern” ( P92 ).
Specifying Power-Saving Settings
Set power-saving settings as needed.
The following four settings are available. For details, refer to the page describing
each function.
• Light source mode ( P125 )
Conserve energy by selecting a mode that is less bright.
• Standby power settings ( P147 )
Conserves energy in standby mode by disabling some network functions.
• Power management mode ( P148 )
Automatically turns off the light source or the power after a certain period if the
projector is idle without an input signal.
• Power management duration ( P148 )
Specify the period after which the light source or projector should go off
automatically if left idle without an input signal when [Power management mode]
is set to [Light source off] or [Standby].