Canon 4353B001 Instruction Manual Download Page 53

Page: 53 / 210

Video

Options

NOTES

• Fast/slow playback modes are not available for scenes converted to

standard definition. Scenes in the [SD Scenes] index screens can only
be played back at normal speed.

[Original]

Original movies as you recorded them.

[Playlist]

Scenes that were added to the playlist (

94) and may

have been rearranged to your liking.

[3D Flip View]

See the following section (

54).

[Photos]

Display the photo index screen.

[SD Scenes]

(

Only when the memory card is

selected) Scenes that were converted to standard definition to
upload them to the Web (

141) or to create standard DVD

discs (

135). Touch [SD Scenes] and then [For Web (MPEG-

2)] or [For DVD (SD-VIDEO)] as necessary.

[Video Snapshot]

To display only video snapshot scenes. Touch

this control button first and then [Original] or [Playlist] as neces-
sary.

Touch the tab of the desired memory: built-

in memory or memory card.

Touch a control button to select the content you want to
play back.

Summary of Contents for 4353B001



















































































































































































































Search results

Summary of Contents for 4353B001

Reviews:

Related manuals for 4353B001

Brands by name

Popular brands

Canon 4353B001, Instruction Manual

Search results

Summary of Contents for 4353B001

Reviews:

Related manuals for 4353B001

Brands by name

Popular brands