Canon 3235B001 Instruction Manual Download Page 89

Page: 89 / 152

Custo

atio

Renaming a Custom Preset File

Follow steps 1-3 in

Changing Custom Preset Parameters

(

88) to select the custom preset file you

want to rename.

1. From the bottom bar, select [

RENAME].

The first character of the custom preset file name will start flashing.

2. Turn the SELECT/SET dial to select a number, letter or punctuation mark and press

the dial.

• The next character of the custom preset file name will start flashing.
• Set the rest of the custom preset file name in the same way.

3. When you finish renaming the custom preset file, press the dial.

You will return to the custom preset editing screen.

4. Close the menu.

Protecting a Custom Preset File

Follow steps 1-3 in

Changing Custom Preset Parameters

(

88) to select the custom preset file you

want to protect.

1. From the bottom bar, select [

PROTECT].

• The protection mark

will appear next to the custom preset file name.

• To cancel the protection, repeat the procedure for a custom preset file with the

mark.

Resetting a Custom Preset File

Follow steps 1-3 in

Changing Custom Preset Parameters

(

88) to select the custom preset file you

want to reset to default values.

1. From the bottom bar, select [

RESET].

A confirmation screen will appear.

2. Select [EXECUTE] and press the SELECT/SET dial.

You will return to the custom preset editing screen.

3. Close the menu.

Protected custom preset files cannot be reset. If you attempt to reset a protected file,

will start

flashing.

Activating the Custom Preset Settings

1. Press the CUSTOM PRESET SELECT

button.

• Repeatedly pressing the button will cycle through

the available custom preset files. You can also set
a custom key as [CP BKWD KEY] to cycle through
the custom preset files in reverse order (from last
to first) (

71).

• When you are not using the custom preset

settings, set the camcorder to

•

and the name of the selected custom preset

file will flash on the screen. After 4 seconds, the
file name will be replaced by the custom preset
file number.

2. Press the CUSTOM PRESET ON/OFF

button.

and the name of the selected custom preset file will stay on and the custom settings will be activated.

After 4 seconds, the file name will be replaced by the custom preset file number.

Summary of Contents for 3235B001

























































































































































Search results

Summary of Contents for 3235B001

Reviews:

Related manuals for 3235B001

Brands by name

Popular brands

Canon 3235B001, Instruction Manual

Search results

Summary of Contents for 3235B001

Reviews:

Related manuals for 3235B001

Brands by name

Popular brands