Canon 28 135 - EOS 50D 15.1MP Digital SLR Camera Instruction Manual Download Page 42

Page: 42 / 228

Select [Language].

Under the [

] tab, select

[

Language

] (the third item from the

top), then press <

Set the desired language.

Turn the <

> dial to select the

language, then press <

The language will change.

Check if the camera’s date and time are set correctly. If necessary, set
the correct date and time.

Select [Date/Time].

Under the [

] tab, select [

Date/

Time

], then press <

Set the date, time and date
display format.

Turn the <

> dial to select the number.

Press <

> so

is displayed.

Turn the <

> dial to select the desired

setting, then press <

> (Returns to

Exit the setting.

Turn the <

> dial to select [

then press <

The date/time will be set and the
menu will reappear.

Before You Start

Setting the Interface Language

Setting the Date and Time

It is important to set the correct date/time because it will be recorded
together with each captured image.

COP

Summary of Contents for 28 135 - EOS 50D 15.1MP Digital SLR Camera





































































































































































































































Search results

Summary of Contents for 28 135 - EOS 50D 15.1MP Digital SLR Camera

Reviews:

Related manuals for 28 135 - EOS 50D 15.1MP Digital SLR Camera

Brands by name

Popular brands

Canon 28 135 - EOS 50D 15.1MP Digital SLR Camera, Instruction Manual

Search results

Summary of Contents for 28 135 - EOS 50D 15.1MP Digital SLR Camera

Reviews:

Related manuals for 28 135 - EOS 50D 15.1MP Digital SLR Camera

Brands by name

Popular brands