Canon 28 135 - EOS 50D 15.1MP Digital SLR Camera Instruction Manual Download Page 122

Page: 122 / 228

122

Using AF to Focus

Select the AF point.

Press the <

> button, then

use <

> to select the AF point.

If you keep tilting <

> in the same

direction, it will toggle between
manual and automatic AF point
selection.

Focus the subject.

Aim the AF point over the subject,
and hold down the <

> button.

The Live View image will turn off, the
reflex mirror will go back down, and
AF will be executed.

When focus is achieved, the beeper
will sound and the Live View image
will reappear.
The AF point used to focus will be
displayed in red.

Take the picture.

Check the focus and exposure, then
press the shutter button to take the
picture (p.118).

You cannot take a picture during autofocusing. Take the picture only
while the Live View image is displayed.

Autofocus will not work with the release button on the Remote Switch
RS-80N3 and Timer Remote Controller TC-80N3 (both sold separately).

COP

Summary of Contents for 28 135 - EOS 50D 15.1MP Digital SLR Camera





































































































































































































































Search results

Summary of Contents for 28 135 - EOS 50D 15.1MP Digital SLR Camera

Reviews:

Related manuals for 28 135 - EOS 50D 15.1MP Digital SLR Camera

Brands by name

Popular brands

Canon 28 135 - EOS 50D 15.1MP Digital SLR Camera, Instruction Manual

Search results

Summary of Contents for 28 135 - EOS 50D 15.1MP Digital SLR Camera

Reviews:

Related manuals for 28 135 - EOS 50D 15.1MP Digital SLR Camera

Brands by name

Popular brands