manualshive.com logo in svg

Canon 2554B001, User Manual

The Canon 2554B001 is an exceptional product that allows users to capture high-quality images effortlessly. With its advanced features and intuitive controls, this camera is perfect for both beginners and professionals. Enhance your photography skills by easily accessing the user manual, available for free download on manualshive.com.

Share
Download
background image

219

Canadian Radio Interference Regulations

This Class B digital apparatus complies with Canadian ICES-003.

Réglementation canadienne sur les interférences radio

Cet appareil numérique de la classe B est conforme à la norme NMB-003 
du Canada.

FCC Notice

(Digital Camera, Model PC1261 systems)
This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions;
(1) this device may not cause harmful interference, and 
(2) this device must accept any interference received, including 
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits 
for Class B digital devices, pursuant to Part 15 of the FCC rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The cable with the ferrite core provided with the digital camera must be 
used with this equipment in order to comply with Class B limits in Subpart 
B of Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless 
otherwise specified in the manual. If such changes or modifications 
should be made, you could be required to stop operation of the 
equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516) 328-5600

CO

PY

Summary of Contents for 2554B001




































































































































































































































Reviews:

No comments

Related manuals for 2554B001

Panasonic Lumix DC-GH5M2 Owner'S Manual preview
Lumix DC-GH5M2
Brand: Panasonic Pages: 96
Panasonic Lumix DMC-FT10 Operating Instructions Manual preview
Lumix DMC-FT10
Brand: Panasonic Pages: 61
Panasonic Lumix DC-ZS200 Basic Owner'S Manual preview
Lumix DC-ZS200
Brand: Panasonic Pages: 76
Panasonic Lumix DMC-GX7 Basic Operating Instructions Manual preview
Lumix DMC-GX7
Brand: Panasonic Pages: 96
Panasonic Lumix DMC-GF7K Basic Operating Instructions Manual preview
Lumix DMC-GF7K
Brand: Panasonic Pages: 52
Panasonic HDCZ10000P Service Manual preview
HDCZ10000P
Brand: Panasonic Pages: 119
Panasonic lumix DMC-FT6 Quick Start Manual preview
lumix DMC-FT6
Brand: Panasonic Pages: 2
Panasonic Lumix DMC-LS80 Instrucciones De Funcionamiento preview
Lumix DMC-LS80
Brand: Panasonic Pages: 32
Panasonic Lumix DMC-G5 Owner'S Manual preview
Lumix DMC-G5
Brand: Panasonic Pages: 232
Panasonic Lumix DMC-FH27 Operating Instructions Manual preview
Lumix DMC-FH27
Brand: Panasonic Pages: 130
Panasonic Lumix DMC-GF1 C Specifications preview
Lumix DMC-GF1 C
Brand: Panasonic Pages: 2
Panasonic Lumix DMC-ZS7 Operating Instructions For Advanced Features preview
Lumix DMC-ZS7
Brand: Panasonic Pages: 62
SBIG ST-4 Operating Manual preview
ST-4
Brand: SBIG Pages: 47
Security Camera King CVIOB-EL1MPIR50-D2-E User Manual preview
CVIOB-EL1MPIR50-D2-E
Brand: Security Camera King Pages: 12
Casio QV-4000 User Manual preview
QV-4000
Brand: Casio Pages: 53
ZIGBEE YALE-852-Ultra Introduction preview
YALE-852-Ultra
Brand: ZIGBEE Pages: 5
Walimex Pro 360 TTL Instruction Manual preview
360 TTL
Brand: Walimex Pro Pages: 32
DRALLE sScale Manual preview
sScale
Brand: DRALLE Pages: 52

Brands by name

Popular brands

Load more brands