Canon 2438C006 User Manual Download Page 293

Page: 293 / 373

Could not connect. Check the PSK settings.

The network key (PSK) of a wireless router to be connected is not set to the machine correctly.

●

Check the network key (PSK) of the wireless router, and set it to the machine again.

Checking the SSID and Network Key(P. 37)
Setting Up Connection by Selecting a Wireless Router(P. 32)
Setting Up Connection by Specifying Detailed Settings(P. 34)

●

If the problem persists even after checking the network key, check whether the machine is properly
installed and ready to connect to the network.

Installation/Settings Problems(P. 263)

Could not connect using the wireless LAN. (for wireless LAN connection)

A connection failed due to an error while setting wireless LAN connection.

●

Restart the machine and set again.

●

If the problem persists even after restarting the machine, check whether the machine is properly installed
and ready to connect to the network.

Installation/Settings Problems(P. 263)

●

If the problem persists even after checking the wireless LAN connection, check the security settings of the
wireless router.

Could not connect using the wireless LAN. (for wireless LAN communication)

Wireless LAN communication failed due to an error.

●

Wait for a while, and set again. If you still cannot get connection, turn OFF the machine and then restart it.

Could not connect using WPS.

When automatic setting with WPS was attempted, the connection failed due to an error.

●

Wait for a while, and set again. If the problem persists, check whether the wireless router supports WPS.

If WPS is supported:

Check whether the machine is properly installed and ready to connect to the network.

Installation/Settings Problems(P. 263)

If WPS is not supported:

Set using another connecting method.

Connecting to a Wireless LAN(P. 26)

Could not detect any connections from wireless devices.

Mobile device detection was not possible within the predetermined length of time.

●

Connect again paying attention to the time limit.

Troubleshooting

288

Summary of Contents for 2438C006






















































































































































































































































































































































































Search results

Summary of Contents for 2438C006

Reviews:

Related manuals for 2438C006

Brands by name

Popular brands

Canon 2438C006, User Manual

Search results

Summary of Contents for 2438C006

Reviews:

Related manuals for 2438C006

Brands by name

Popular brands