Canon 0744B001 - DC 10 Camcorder Instruction Manual Download

Page: 25 / 148

Prep

rat

ions

Step 3: Using the Wireless Controller

Inserting the Battery (Lithium Button Battery CR2025)

1. Press the tab in the direction of

the arrow and pull out the battery
holder.

2. Place the lithium button battery

with the + side facing up.

3. Insert the battery holder.

Using the Wireless Controller

Point the controller at the
camcorder’s remote sensor when
you press the buttons.

The wireless controller may not work properly when the remote sensor is
situated under strong light sources or direct sunlight.

If the wireless controller does not work, check that the remote sensor is not set
to [OFF

] (

83).

When the camcorder cannot be operated with the wireless controller, or when it
can only be operated at a very close range, replace the battery.

Tab

Summary of Contents for 0744B001 - DC 10 Camcorder





















































































































































Search results

Summary of Contents for 0744B001 - DC 10 Camcorder

Reviews:

Related manuals for 0744B001 - DC 10 Camcorder

Brands by name

Popular brands

Canon 0744B001 - DC 10 Camcorder, Instruction Manual

Search results

Summary of Contents for 0744B001 - DC 10 Camcorder

Reviews:

Related manuals for 0744B001 - DC 10 Camcorder

Brands by name

Popular brands