Canon 0744B001 - DC 10 Camcorder Instruction Manual Download

Page: 21 / 148

Prep

rat

ions

Preparations

Step 1: Preparing the Power Supply

The camcorder can be powered by a battery pack or be connected to a household power
outlet. Charge the battery pack before use.

Attaching and Charging the Battery Pack

1. Turn off the camcorder.

2. Attach the battery pack to the

camcorder.

• Open the LCD panel.
• Slide in the connector end of the battery

in the direction of the arrow and press it
gently until it clicks.

3. Connect the power cord to the

adapter.

4. Plug the power cord into a power

outlet.

5. Open the terminal cover and

connect the power adapter to the
camcorder’s DC IN terminal.

The charge indicator starts flashing. The
indicator will stay on when charging is
complete.

Once the battery is fully charged:

1. Disconnect the power adapter from the camcorder.

2. Unplug the power cord from the power outlet and the adapter.

To remove the battery pack:

Hold the BATT. button pressed down to release it, and pull out the battery
from the ridge on its bottom part.

BATT.
button

DC IN terminal

Charge indicator

Remove the battery terminal cover
before attaching the battery

Summary of Contents for 0744B001 - DC 10 Camcorder





















































































































































Search results

Summary of Contents for 0744B001 - DC 10 Camcorder

Reviews:

Related manuals for 0744B001 - DC 10 Camcorder

Brands by name

Popular brands

Canon 0744B001 - DC 10 Camcorder, Instruction Manual

Search results

Summary of Contents for 0744B001 - DC 10 Camcorder

Reviews:

Related manuals for 0744B001 - DC 10 Camcorder

Brands by name

Popular brands