Canon 0575B002 User Manual Download Page 105

Page: 105 / 129

Chapter 10

103

Troubleshooting

Trouble scanning with Multi-Scan or Multi-Crop function

Slow Scanning Speed

Cause

Action

The original is positioned
outside the supported area.

Check the position of the original on the document glass. Observe the following
when using the Multi-Scan or Multi-crop function.

There should be a gap of at least 0.4" / 10mm between the edge of the Platen
Glass and originals.

Leave at least 0.4" / 10mm between the originals.

A maximum of 10 originals can be scanned at once.

If an original is slightly crooked on the platen-within 10 degrees of true-the
image is automatically straightened.

The Multi-Scan function only works with rectangular originals such as photos.

Originals that are not rectangular (irregularly shaped, close-cropped photos)
cannot be detected correctly.

Error arising from
application software
specifications.

Some application softwares do not support multiple image scanning. Scan each
item individually without using the Multi-Scan or Multi-Crop function.

Cause

Action

Resolution is set higher
than necessary.

To view the image on a monitor, set the Output resolution to 75 dpi. To print, set
the Output resolution to a value such as 300 dpi.

The descreen function is on. Turn the [Descreen] function off. (See the

Scan Guide

)

Summary of Contents for 0575B002


































































































































Search results

Summary of Contents for 0575B002

Reviews:

Related manuals for 0575B002

Brands by name

Popular brands

Canon 0575B002, User Manual

Search results

Summary of Contents for 0575B002

Reviews:

Related manuals for 0575B002

Brands by name

Popular brands