Canon 0296B002 - EOS 5D Digital Camera SLR Instruction Manual Download Page 143

Page: 143 / 180

143

Print Ordering

For [Index]

If you want to include the image in the
index print, checkmark <

> the box.

Otherwise, leave the box unchecked.

Press <

> to checkmark the box

>, or press <

> again to remove

the checkmark.

If there are other images you want to
select, repeat steps 2 and 3.

You can select up to 998 images.

Exit the menu.

Press the <

> button.

The Print Order screen will reappear.

Press the <

> button again to

save the print order to the CF card.
The menu will then reappear.

Summary of Contents for 0296B002 - EOS 5D Digital Camera SLR





















































































































































































Search results

Summary of Contents for 0296B002 - EOS 5D Digital Camera SLR

Reviews:

Related manuals for 0296B002 - EOS 5D Digital Camera SLR

Brands by name

Popular brands

Canon 0296B002 - EOS 5D Digital Camera SLR, Instruction Manual

Search results

Summary of Contents for 0296B002 - EOS 5D Digital Camera SLR

Reviews:

Related manuals for 0296B002 - EOS 5D Digital Camera SLR

Brands by name

Popular brands