Canoga Perkins 9161, User Manual

Page: 38 / 54

7. To set up VLAN information for a specific port, type
7
, then press <Space> to select that port;
and set values for these parameters on the SP x Information screen:
•
Participation Include/Exclude/Auto: Select specific numbers of VLANs that this port will
Include (always), Exclude (never), or Auto (dynamically) participate in
•
Tagging Enable/Disable: Enable, allow tags to remain on packets as they exit the 9161; or
Disable, strip tags from packets before they exit the 9161
•
Double Tagging Enable/Disable: Enable, add service provider ID tags to packets as they exit
the 9161; or Disable, strip service provider ID tags from packets before they exit the 9161
•
Accept Frame: Accept frames for this VLAN Only or Accept All frames
•
Ingress Filter: Enable, filter out received frames that are not for this VLAN, or Disable,
forward all received frames.
•
PVID: Enter the VLAN ID to be assigned to any received untagged or priority tagged frames
•
Default User Priority: Set the priority for any tagged packets received at this port
8. At the VLAN x Information screen, you can view or update parameters for a specific VLAN.
Type
2
, "View/Change Interface," and press <Enter>. You can edit various parameters, such as
Admin Mode, Priority, Path Cost, and Edge Port.
9. To return to the Switch Configuration menu, press <Esc>.
Set Up Optional Double Tagging
If you are using the 9161 within a service provider environment, you can include VLANS from
different customers that are connected to individual ports. You can view and set service provider ID
tags for those ports at the Double Tagging Configuration screen, which lists the ports and associated
PVIDs. The double tag is derived from the PVID. When enabled, double tagging adds the double tag
to a packet as it exits a port; or when disabled, strips the double tag as it exits a port. When you set
values for ports on the Double Tagging Configuration screen, it automatically adjusts associated
parameters on the VLAN port
x Information screen.
To access the Double Tagging Configuration screen, follow these steps:
1. From the Switch Configuration menu, type
6
, "Double Tagging Configuration," and press
<Enter>.
2. At the Double Tagging Configuration screen, type
1
to enable or 2 to disable double tagging, then
at the prompts, enter the port number and PVID, then press <Enter> to set the tag.
3. To save the changes and return to the Switch Configuration menu, type
3
, "Accept configuration
and exit," and press <Enter>.
9161 Network Interface Device
3-24