Canoga Perkins 9161, User Manual

Page: 13 / 54

Table 1. 9161 Management LEDs
LED Status Description
Off No power/power supply not installed
Green Normal operation
Amber System self-test
P1 (Primary) or
P2 (Secondary) Power
Red Power failure/Major alarm
Green Normal operation
Amber System self-test/one fan failed
Red More than one fan failed
Fans
Red blinking Fan not installed
Off No power
Green Normal operation
Green blinking Management traffic
Amber System self-test/over-temperature
Amber blinking Management traffic with over-temperature
Management
Red Diagnostic or CPU failure
Table 2. 9161 Interface LEDs
LED Status Description
Off No transmission activity
Green blinking Transmission activity
Amber System self-test
TX
Red Port disabled; may be due to Link Loss Forwarding (LLF)
Off No link
Green Link established
Green blinking Receiving activity
Amber System self-test
RX
Red Receiving Remote Fault
Off Non-network connection
Green Network connection
NET
Amber System self-test
Alarms
The 9161 can generate Traps and Major and Minor Alarms. For details about the Traps Log and
setting up notification, see Chapter 4.
9161 Network Interface Device
2-3