Printed : 8/13/01
31
P/N 951-05002032
4. Use slight downward pressure at the mid section of
the seat while sliding the seat forward onto tabs.
5. Position the seat so the rear seat brackets are on the
outside of the subframe rails.
6. Install
the
side
number
panels.
FORK LEG GUARDS
Remove the brake line clamp bolts from the left fork guard.
Then, remove the fork leg bolts and guard.
To install, place the panel in the original position and install
the bolts.
TORQUE : Fork, leg guard, bolts
5.0 lbf•ft (6.8N•m)
TORQUE : Brake, fork leg brake line clamp, bolts
5.0 lbf•ft (6.8N•m)
To remove, remove the upper and lower (with fender nut)
number plate bolt.
NOTE : Keep your hand under the front fender so the
fender nut does not fall when the lower bolt is removed
To install, place the front fender and panel in the original
position and install the bolts.
TORQUE : Panel, front number plate, lower bolt
5.0 lbf•ft (6.8 N•m)
1.
Brake line clamp (left guard)
2.
Guard
3.
Bolts
2
1
3
1.
Upper bolt
2.
Lower bolt
1
2
