14
137366 Rev 1.
English
2019 Moterra Neo - Owner’s Manual Supplement
4 Nm
12 Nm
6
5
5
4
3
2
1
8
7
1. Frame Pivot
2. Main Pivot Axle
3. Main Pivot Nut
4. Ring Clip
5. Bearing
6. Spacer
7. Chain Guide Assy.
8. Swing Arm
Main Pivot
The main pivot assembly connects the swingarm to
the frame. Its should be inspected periodically by a
Cannondale Dealer to make sure all the parts are good
condition.
Service of worn or damaged parts in this assembly
should be performed by a Cannondale Dealer.
As shown, a significant degree of disassembly is
required.
The main pivot bearings (5) should be renewed
periodically to ensure best performance, or if they
become damaged during use. An indication of damage
would be excessive play or loose feel of the swing arm
connection.
Use Cannondale tool KP169/ bearing drivers to install
and remove the bearings.
The non-drive side bearing (5) is retained by a ring clip
(4).
Summary of Contents for Moterra NEO
Page 23: ...English...
