9
137366 Rev 1.
English
2019 Moterra Neo - Owner’s Manual Supplement
Battery Charging Port
1
2
T
he battery charging port is located on the
left side of the bicycle at the top of the down
tube.
The charging port enables the battery to be
charged while installed in the bicycle.
To connect to the charger cable to the port
connector:
1. First, familiarize yourself with the safety
information for charging provided by
the drive system manufacturer. And, of
course, the battery must be installed and
in good condition to accept a charge.
2. Place the bike and charger in a secure
area where both will remain undisturbed
while the battery is charged.
3. Lift up the battery port cover.
See Figure 1.
4. Attach the charger cable. See Figure 2 & 3.
Follow the manufacturer’s charging
instructions for the duration of charging.
5. Disconnect chargercable from the port
connector and replace cover.
See Figure 4
Make sure cover is seated fully into the
frame opening.
6. Disconnect the charger from its source of
power.
3
4
Summary of Contents for Moterra NEO
Page 23: ...English...
