40
Shimano Total Electric Power System
Please note:
specifications are subject to change for
improvement without notice. (English)
© May 2014 by Shimano Inc. HTR
Key Number
The number that is attached to the key is
needed in case you need to purchase spare
keys.
Make a note of the in the following box and
keep it in a safe place.
35
Other
Symptom
Cause / Possibility
Remedy
When pressing the switch,
two beeps sound, and the
switch cannot be operated.
Operation of the switch being pressed has
been disabled.
It is not a sign of a malfunction.
Three beeps sound.
An error or warning is occurring.
This occurs when a warning or error is
displayed on the cycle computer. Refer to
the section "Error messages on the cycle
computer" and follow the instructions
provided for the appropriate code.
When using a electronic
gear shifting mode, I feel
that the level of assistance
weakens when the gears
shift.
This occurs because the level of assistance is
being adjusted to the optimum level by the
computer control.
It is not a sign of a malfunction.
Sound occurs after gear
shifting.
Contact the place of purchase.
A noise can be heard from
the rear wheel during
normal riding.
Gear shifting adjustment may not have
been carried out correctly.
For mechanical gear shifting
Adjust the cable tension. For details, refer
to the Service Instructions for the derailleur.
For powered gear shifting
Contact the place of purchase.
When you stop the bicycle,
the gear does not shift to
the position preset in the
start mode.
You may have been pressing the pedals too
strongly.
If you press the pedals lightly, the gear
shifts more easily.
Key number