manualshive.com logo in svg

Cannondale Kinneto E-Series, Owners Manul, Page: 40 / 42

Share
Download
Cannondale Kinneto E-Series Owners Manul Download Page 40

39

UM-70H0A-001-00

User’s manual

E6000 Series

English

34

Lights

Symptom

Cause / Possibility

Remedy

The front light or the tail 
light does not illuminate 
even when the switch is 
pressed. 

The E-tube Project settings may be wrong.

Contact the place of purchase.

Cycle computer

Symptom

Cause / Possibility

Remedy

The cycle computer display 
does not appear even when 
the power switch is pressed. 

The amount of battery charge may be 
insufficient.

Recharge the battery, and then turn the 
power on once more. 

Is the power turned on?

Hold down the power switch to turn on the 
power. 

Is the cycle computer correctly installed to 
the bracket? 

Install the cycle computer correctly while 
referring to "Installing and removing the 
cycle computer".

Is the electric wire connector correctly 
installed? 

Check to see if the connector of the electric 
wire connecting the motor unit to drive 
unit is not disconnected. If you are not 
sure, contact the place of purchase.

The gear position is not 
displayed. 

The gear position is only displayed when 
the power gear shifting unit is installed.

Check if the electric wire connector is 
disconnected. If you are not sure, contact 
the place of purchase.

Can the beep be turned off.

Change the setting.
Refer to "Beep setting (Beep)".

Can the backlight be turned 
off.

Change the setting.
Refer to "Backlight setting (Backlight)".

The setting menu cannot be 
launched while riding the 
bicycle. 

The product is designed so that if it detects 
that the bicycle is being ridden, the Setting 
menu cannot be launched. This is not a sign 
of an abnormality. 

Stop the bicycle and then make the 
settings. 

Summary of Contents for Kinneto E-Series











































Reviews:

No comments