23
SmartSense Cradle
Information
SmartSense Cradle
Information
The SmartSense Battery Cradle (1)
retains the SmartSense Battery (2) on
the bicycle frame.
The cradle (1) has two cable connectors
for connecting SmartSense compatible
components mounted on the bicycle.
The cables exiting the cradle are
identical in function and not specific to
any particular component. When
attaching the extension cables t s, it is
best however to use the upper cable for
the front components and the lower
cable for the rear-mounted devices.
The connector end should be aligned
with the arrows and pressed firmly
together.
Serial Number
The serial number (3) is embossed into
the cradle housing.
Use this number when the need arises
to know relevant SmartSense system
service information.
Frame Installation
The cradle should remain in place on the
bicycle at all times when SmartSense
devices are installed.
If it is necessary, remove the two mounting
screws to remove the cradle from the
frame in order to connect and/or
disconnect the two internal extension
cables. It is not possible to service these
cables with the cradle in place.
Secure the cover or cradle with the cover
screws. Use a torque wrench to tighten as
indicated.
If the SmartSense cradle is removed, the
frame opening cover (10) should be
installed.
Summary of Contents for CY22 SmartSense
Page 31: ......