© 2002 Cannondale Corporation - All Rights Reserved
34
2003 Motorcycle OM.fm
WARNING
Indicates a potential hazard that could result in serious injury or death.
clutch cover.
8.
Use the holding tool to hold the release collar
and loosen the 8 mm locknut.
9.
Turn the locknut counterclockwise all the way but
do not remove it. Hold the release collar with the
tool and use a 2.5 mm allen to turn the adjuster
locknut (clockwise) until it lightly bottoms. Then,
back the adjuster out (counterclockwise) three
full turns.
10. Tighten the adjuster locknut to 3.3lbf•ft (4.5 N•m).
11. Inspect the clutch cover seal for any rips, tears,
or other damage. Replace it with a new one if it is
damaged.
12. Install the seal, cover and cover bolts. Tighten
the bolts to 3.3lbf•ft (4.5 N•m).
13. Position the shift lever as removed and install the
pinch bolt. Tighten to 5.0 lbf•ft (6.8 N•m).
1.
Cover bolts
1.
Holding tool
1
1
1.
Release collar
2.
Locknut
3.
Adjuster
2
1
3
