manualshive.com logo in svg

Cannon CCS-2100, Instruction & Operation Manual, Page: 78 / 111

Share
Download
Cannon CCS-2100 Instruction & Operation Manual Download Page 78

73

CANNON

®

 CCS-2100 with VISCPRO

®

 Instruction & Operation Manual

Version 2.0a — November 2010; 

CANNON

®

 Instrument Company

2139 High Tech Road • State College, PA  16803 • USA

wildcard. You may use multiple IDs separated by a comma. For example,

CL%,CCS%

 would display all samples beginning with 

CL

 or 

CCS

.

NOTE

If no instruments/probes/Sample IDs are selected, the analysis will
display data for ALL instruments/probes/Sample IDs.

Using the report/port output filter

Use the Report or Port Output filter to determine which data will be
calculated and/or included in the analysis, and/or in what sequence that
data will be displayed. Report/Port Output filter options will vary depend-
ing on the nature of the analysis. For more information on Report/Port
Output filter options, please see the chapter on the specific analysis.

Reconfiguring a displayed analysis

An on-screen analysis may be reconfigured using the same filtering tools
available when creating a new configuration. To access configuration
options for a displayed analysis:

1. Select 

Analyses 

from the VISCPRO

®

 primary menu options.

2. Select 

Configure Analysis

 from the 

Analyses 

options.

Summary of Contents for CCS-2100
















































































































Reviews:

No comments