manualshive.com logo in svg

Cannon CCS-2100, Instruction & Operation Manual, Page: 51 / 111

Share
Download
Cannon CCS-2100 Instruction & Operation Manual Download Page 51

46

CANNON

®

 CCS-2100 with VISCPRO

®

 Instruction & Operation Manual

Version 2.0a — November, 2010; 

CANNON

®

 Instrument Company

2139 High Tech Road • State College, PA  16803 • USA

The Choose Analysis window

Select 

Open Selected Analysis Configuration

 if you wish to

create and display the selected analysis using the saved configuration
highlighted in the list box on the right side of the 

Choose Analysis

window.

Select 

View and Open Existing Configuration

 if you wish to open

the configuration window for the analysis configuration highlighted
in the list box on the right side of the 

Choose Analysis

 window.

Select 

Define and Open New Configuration

 if you wish to open

the configuration window using default settings for the selected
analysis.

Click the appropriate radio button 

 corresponding to the desired

option. Then select the desired saved configuration (if any) and click 

OK

.

NOTE

For more information on defining and using configurations, see Chapter 7.

Window options

The 

Window 

menu provides options for scaling and arranging multiple

windows/icons for screen display. In VISCPRO

®

 you can also save and

restore a specific window configuration.

Select this standard Windows

®

 display option to arrange any minimized

analysis/report or instrument windows at the bottom of the primary
application window.

Select this Windows

®

 display option to resize and regroup all open

windows to view multiple on-screen reports/instruments. You may select

horizontal 

or 

vertical 

tiling for more convenient viewing of data.

Summary of Contents for CCS-2100
















































































































Reviews:

No comments