background image

7

    Electric Timer

The electronic programmer has the function of automatically
switching on the oven (at the required time) and switching
it off at the end of the set cooking time. The 4 figure luminous
display showing the actual time and the programming times,
also shows the current state of the oven by means of the
following symbols:

Oven on

Minute minder

Automatic programme AUTO
Point  • (this divides the hour from the minutes on the
display). All the functions may be programmed for a total of
23 h and 59 min. Maximum cooking time is 10 hours.

Adjusting the clock
(At installation, after power failures, clock in advance or
behind). Select manual mode by pressing key  , adjust
the hour and minutes using the -  and +. keys.

Manual oven mode (Programming excluded)
Press the key  ; and the oven is switched on, the AUTO
symbol goes out and the 

 (oven on) symbol comes on.

This operation erases any set programme.

Semi-automatic oven mode

1st example: start in manual cooking mode - programmed
cooking time.

Put the food to be cooked in the oven.

Press the 

 key (duration) and adjust the cooking

time using the - and + keys: the oven switches on, the
AUTO and 

 (oven on) symbols light up.

Turn the selector and the thermostat knobs onto the
required function and temperature respectively.

At the end of the set cooking time, the oven is
automatically switched off, the symbol 

 (oven on) goes

out and the AUTO symbol blinks; an acoustic signal
sounds.

2nd example: start with manual cooking mode - end with
programmed cooking mode.

Put the food to be cooked in the oven.

Press the 

 key (end of cooking) and adjust the end

of cooking time using the - and + keys: the oven switches
on, the AUTO and 

 symbols light up.

Turn the selector and the thermostat knobs onto the
required function and temperature respectively.

At the end of cooking, the oven is automatically switched
off, the 

 symbol (oven on) goes out and the AUTO

symbol blinks; an acoustic signal sounds.

Automatic oven mode (programmed cooking duration and
end)

Put the food to be cooked in the oven.

Press the key 

 (Duration) and adjust the cooking

time using the - and + keys: the AUTO and 

 (oven on)

symbols light up (the oven switches on).

Press the key 

 (end of cooking) and adjust the end

of cooking time using  the - and + keys: the 

 symbol

goes out (the oven switches off).

Turn the selector and the thermostat knobs onto the
required function and temperature respectively.

The programmer automatically sets the start of cooking
time, which is shown by the symbol 

 (oven on) coming

on. When the cooking time has elapsed, the oven is
automatically switched off, the 

 (oven on) symbol goes

out and the AUTO symbol blinks; an acoustic signal
sounds.

Minute minder

Press the 

 key (minute minder) and set the time required

using the - and +  keys. An acoustic signal sounds at the
end of the programme.

Buzzer
The buzzer emits a sound for 7 minutes after the end of the
selected programme; it may be stopped by pressing any
function key. It is possible to choose 3 different types of
acoustic signal. By pressing the - key the actual signal
tone appears. Now, within 7 seconds, every further press
of the - key changes the signal tone.

Program control

Press the key 

 for the remaining time to be displayed,

and the key 

 to check the end of cooking time.

Erasing programs
Once a program has been carried out, it is automatically
erased; it can also be cancelled by pressing the key 
(manual).

Summary of Contents for 10460G





















Reviews: