CANGAROO X55P02AS-D, Manual Instruction, Page: 13 / 39

Model Accessory Electrical specifications
X55P02AS-D Measuring cup and bottle tongs AC220V/ 50HZ 600W
MODEL AND ACCESSORY
COMPONENTS OF THE APPLIANCE
MANUAL INSTRUCTIONS FOR USE
ATTENTION! If you do not clean the basis of the sterilizer from scale deposition every week, as
described in
“GUIDELINES FOR CLEANING AND MAINTENANCE”, the product will not function
normally! We recommend you to use boiled or filtered water in the device to decrease the risk from
scale deposition.
27. Whe the product is not being used, please, store it in a dry cool place, away
from direct heat sources, water or the reach of children.
28.
The product complies with the EN60335 and EN62233 standards.
1. Lid
2. Tray
3. Sterilizer body
4. Power button
5. Base
6. Switch
7. Measuring cup
8. Bottle tongs
BEFORE STARTING TO USE THE PRODUCT
Before using the product for the first time, please, follow the listed steps:
1. Measure exactly 80 ml of water and pour it into the reservoir in the base of the sterilizer.
2. Put consequently the main sterilizer body, the tray and the lid on the top.
3. Plug the supply cord into electric power outlet and turn on the switch. The push the power button in
order to activate the process of sterilization.
4. Once the water has reached 100
°C, it will convert into steam. When the water evaporates
completely, the sterilizer will automatically turn off.
5. Leave the sterilizer to cool down for about 3 minutes. Turn off the switch and unplug the supply
cord.
6. Take off the upper lid, the tray and the main body of the sterilizer and pour out the residual water.
Wipe dry the unit. Now the sterilizer is ready for use!
12