CANGAROO GENTLE TOUCH User Manual Download

Page: 15 / 57

IV. CHARGING THE ELECTRIC MOTOR OF THE PUMP

V. ASSEMBLY OF THE ELECTRIC BREAST PUMP

ATTENTION! NEVER STERILIZE OR IMMEDIATE THE PUMP MECHANISM AND TUBE CONNECTING IT TO THE PUMP BODY
- PART 5; See Figure AD.
1. Step 1: Place the silicone valve (8) at the lower end of the pump body. Make sure that it is properly fixed around the
ends of the pump body opening intended for it. Important! If the valve is loose or not installed correctly, it will not be
possible to create a sufficient vacuum !.
2. Step 2: Fix the feeding bottle (10) to the pump body (6) by turning the bottle gently clockwise so that the thread of the
bottle coincides exactly with the thread of the pump body
3. Step 3: Place the piston (4) in the upper part of the pump body. Make sure that it is properly fixed around the ends of
the pump body opening intended for it.
4. Step 4: Put the protective cover on the upper side of the pump body. Press and turn clockwise to fit in the correct
position.
5. Step 5: With clean hands, insert the silicone nozzle (2) into the pump body (6). As you need to make sure it is placed
tightly. Tip: If you are not going to use the breast pump, fit the protective cover (1).
6. Step 6: Insert one side of the tube (5) towards the pump body (6). Then insert the other side of the tube into the pump
motor (9). So you can now use the breast pump.
Follow the attached product assembly schedules to ensure proper assembly.

Power connection:
1. Plug the power adapter cable into the charging socket on the pump base.
2. Plug the power adapter into an electrical outlet.
3. Do not use the breast pump during charging, as its battery will be damaged.

VI. USE

Using the pump - See Figure UD.
1. Wash your hands thoroughly and make sure your breasts are clean. Express some milk to check that your milk ducts are
not blocked. The pump must be sterile and assembled.
2. Sit down and relax in a comfortable chair, leaning forward slightly (Use a soft and comfortable pillow as a backrest).
3.Put the pump on your breast and start the pump motor.
A. Massage (Stimulation):
This feature helps to stimulate the flow of breast milk. We recommend that you use this option first and then switch to
squeezing mode. The massage regime mimics breastfeeding a baby, not too hard, and stimulates the flow of milk. The
pumping mode also mimics baby sucking, but is stronger than the first mode, more even and with great efficiency.
Press the mode selection button and activate the massage function. You can adjust the stimulation levels with the "+" and
"-" buttons. They are a total of 10. And through the frequency button - the degrees of frequency. They are a total of 3.
B. Squeezing:
Press the mode dial and activate the squeeze function. With the "+" and "-" buttons you can adjust the drain levels. They
are a total of 15. And through the frequency button - the degrees of frequency. They are a total of 3.
If there is no pumping result, do not continue! Try using the pump at another time of the day.
On average, you have to pump for 8 minutes to drain 120 ml of milk. Keep in mind that the amount of milk varies from
woman to woman. If you find that you usually squeeze more than 120 ml per session, then you should use a larger
feeding bottle.
Do not overfill the milk bottle to prevent milk from leaking out of the bottle.
When you stop using the pump, switch it off from the ON / OFF button. Then remove the tube from the back of the pump
body. Remove the pump body from the bottle. Close the bottle with the spiral ring and the pacifier and place a lid on top
to keep it sterile.

VII. WHEN TO USE YOUR BREAST PUMP

1. If it is possible. Only if you have sufficient milk secretion and normal time for breast feeding. The use of the electric
breast pump may begin usually two or four weeks after the birth of your baby.
2. In the following cases you can always use your breast pump:

•

When breast milk must be provided to your baby, but you are in the hospital.

•

If you have more breast milk, you can express some of it between meals in order to reduce the pain of the bulging

breasts, and this way it is easier for the baby to suck.

•

If your nipples pain or are cracking, you can express some milk for feeding until the nipples get back.