12
Due to technological innovations, the product descriptions in this manual may
not be completely consistent with your refrigerator. Detailed information is in
accordance with the final product.
*
The most energy-saving configuration requires
drawers and door bins to
be positioned in the product and the fan running,
please refer to the
above
pictures.
** The pictures above are only for reference. The actual configuration will
depend on the physical product or statement by the distributor.
II.
Preparations for use
Installation location:
1.
Ventilation condition
The position you select for the refrigerator installation should be
13
well-ventilated and has less hot air. Do not locate the refrigerator near a
heat source such as cooker, and avoid it from direct sunlight, thus
guaranteeing the refrigeration effect while saving energy consumption. Do
not locate the refrigerator in the damp place, so as to prevent the
refrigerator from rusting and leaking electricity. The result of the total
space of the room in which the refrigerator is installed being divided by the
refrigerant charge amount of the refrigerator shall not be less than 8 g/ M3.
Note: The amount of refrigerant charged for the refrigerator can be found
on the nameplate.
2. Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore,
at least
30
mm of free space should be spared at the top side, more
than 100mm on both sides, and above 50mm at the back side of the
refrigerator. Dimensions in mm:
D
H
A
B
C(
°
°
)
E
F
544
641
1700
890
1096
125
50
100
Note
：
Figure 1, Figure 2 only illustrate the space demand of the product.
3. Level ground
Place the refrigerator on the solid and flat ground (floor) to keep it stable, or
else, it will give rise to vibration and noise. When the refrigerator is placed on
such flooring materials as carpet, straw mat, polyvinyl chloride, the solid
backing plates should be applied underneath the refrigerator, so as to prevent
color change due to heat dissipation.
13
