Candy CIF 130, Instruction Manual

Page: 17 / 132

Symptom
ossible Cause
Remedy
Appliance does not work.
Appliance is not switched on.
Mains plug is not plugged in or
is loose.
Switch on the appliance.
Insert mains plug.
Check fuse, replace if necessary.
Fuse has blown or is defective.
Mains malfunctions are to be
corrected by an electrician.
Socket is defective.
Appliance cools too much. Temperature is set too cold.
Turn the temperature regulator
to a warmer setting temporarily.
Temperature is not properly
adjusted.
Door was open for an
extended period.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
The appliance is near a heat
source.
Please look in the “initial Start
Up” section.
Open the door only as short
as necessary.
Turn the temperature regulation
to a colder setting temporarily.
Please look in the “installation
location” section.
The food is too warm.
Heavy build-up of frost, possibly
also on the door seal.
Interior lighting does not work. Light bulb is defective.
Please look in the “changing
the Light Bulb “section.
Door seal is not air-tight(possibly
after reversing the door)
Carefully warm the leaking
sections of the door seal with a
hair dryer(on a cool setting). At
the same time shape the war-
med door seal by hand such
that it sits correctly.
Appliance is not level.
The appliance is touching the
wall or other objects.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
Readjust the feet.
Move the appliance slightly.
If necessary, carefully bend the
component out of the way.
Unusual noises.
The compressor does not start
immediately after changing the
temperature setting.
This is normal, no error has
occurred.
The compressor starts after a
period of time.
Water on the floor or storage
shelves.
Water drain hole is blocked.
See the “cleaning and care”
section.
16
GB