Candy CIF 130, Instruction Manual

Page: 12 / 132

Before use
Remove all securing tapes. Wash the inside of the appliance with lukewarm water with a little bi-
carbonate of soda added (5ml. to 0.5 liter of water).Do not use soap or detergent as the smell may
linger. Dry the appliance thoroughly.
To start the appliance
1. Allow the appliance to stand for 2 hours after installation.
2. Plug in the appliance and switch on at the mains supply.
3. Turn the thermostat control to the required setting. A midway setting is usually suitable for no-
rmal operation (see thermostat control).
4. Leave the appliance for approximately 4 hours for the correct temperature to be reached before
placing food inside.
Thermostat control
The thermostat control situated in the control panel regulates the temperature of the freezer
compartment.
Position “MIN” Cold.
Position “MAX” Coldest.
1.Warning light (red)
2.Pilot light (green)
3.Fast freeze indicator light (yellow)
4. Push button for Fast freeze
5. Thermostat control knob
When the push the fast freeze button, the compressor works continuously to fast freeze much
hot food.
The temperature will be affected by:
Room temperature
How often the door is opened
How much food is stored
Position of the appliance
MIN
MAX
11
GB