Candy CATL 7080 WKI Instruction Manual Download Page 2

 

 

.

IMPORTANT SAFEGUARDS

…………                           

。。

………………  …    .. 

1. This product belongs to Class I appliances. Please pay attention to electricity 

safety when using: This machine uses a single-phase two-pole grounded power 

outlet, the outlet must be reliably grounded, and the grounding terminal should not 

be connected with gas pipelines, water pipes and other utilities. 

2. If the washing machine is connected to the power supply via a socket board or a 

portable power unit, the socket board or the portable power unit must be placed in 

a place that is not wet and cannot be easily splashed by water. 

3. Do not use a socket with other electrical appliances, do not use when the plug 

and socket are loose. 

4. If there is any dust on the mounting surface of the power plug and the insert, 

carefully wipe it with a dry cloth. 

5. When the washing machine is in normal use, the power cord plug should be 

easily accessible by hand. When power is cut off, moved, unused or cleaned, be 

sure to unplug the power plug and turn off the water tap. Note: Please do not plug 

or unplug the power cord with wet hands. 

6. Do not excessively bend, stretch, twist, strap, or overload the power cord. 

7. The connection mode of this unit's power cord is Y connection. If the power cord 

or power plug is damaged, it must be replaced by our special service point or 

full-time personnel of our after-sales service department to avoid danger. 

8. The washing machine cannot be installed in the bathroom and other wet places, 

absolutely cannot use water to wash, do not put wet clothes on the control board 

of the washing machine. 

Summary of Contents for CATL 7080 WKI






















Reviews: