manualshive.com logo in svg

Candy CATL 7080 WKI, Instruction Manual, Page: 15 / 21

Share
Download
Candy CATL 7080 WKI Instruction Manual Download Page 15

 

15 

 

prompt the user to deal with the problem. The next step will not continue until the "Rinse" button 
is pressed. 

4. "Preset" operation method 

  1) After turning on the power, the user wants to start the preset program. After setting the 
program, water level, process and other options, the user can press the "preset" button to select 
the required preset time, and then press the "start" button to start the program. After the "preset" 
is activated, the digital display shows the remaining time of the preset (in hours), and the "." light 
flashes and lights up. 
    2) After "preset" is started, other buttons are invalid except "ON/OFF" button. 
    3) After "preset" is started, please close the upper cover of washing machine, otherwise the 
program will pause and alarm. 
    4) After the "Preset" is started, if you want to change the running program or cancel the preset, 
you need to cut off the power supply and reset. 
 

 

MAINTENANCE                                                                                                                         

1.  Clean the filter . 

 

 

Pull the filter out by 
pressing and holding 
the hook.

 

Remove the filter 

from the filter 

cover. 

 

Turn the filter bag 

from inside out, 

and wash in water 

to remove the lint. 

 

Reinstall the 

filter

 

 

2. Clean the inlet valve filter.

 

 The inlet valve filter is easy to be blocked by impurities and hinders water intake. 

Please clean it regularly (usually about 2 months). 

Summary of Contents for CATL 7080 WKI






















Reviews:

No comments