manualshive.com logo in svg

Candy CATL 7080 WKI, Instruction Manual, Page: 17 / 21

Share
Download
Candy CATL 7080 WKI Instruction Manual Download Page 17

 

17 

 

washing machine. 

 The 

button operation is invalid during the laundry process. This is the default 

setting of the washing machine. It needs to be paused before it can be operated. 

 

1. Common default and solution

：

   

 

Problem Display 

Cause 

Solution 

 

 
 
 

Totally no   

working 

No display 

The power plug is not plugged 
in and the power switch is not 
pressed. 

Plug in the power plug and press 
the power switch. 

No display 

The outlet has no electricity or 
the fuse is broken. 

Ask an electrician to check the 
socket or fuse. 

No display 

The power outage causes the 
program to disappear and the 
operator must operate it again 
after power on. 

Turn on the machine after power on 
and operate various buttons as 
required. 

 

There is no 
display when 
the voltage is 
too low, or the 
fuse may be 
open when the 
voltage is too 
high. 

The voltage is too low or too 
high. 

Unplug the power plug and wait 
until the voltage is normal 

Poor 
drainage 

E1 

The outlet of the drain pipe is 
too high or blocked, resulting in 
the water not being discharged 
after 7 minutes 

After checking the drain and 
rectifying the fault, open the cover, 
close it, and re-enter the drain. 

Not 
dehydrated 

E2 

No close the upper cover when 
washing (pause and alarm) or 
dehydration (cover and alarm) 

Close the cover. 

Dehydration 
touch the 
shell 

E3 

Because the laundry unevenly 
touches the shell when it is 
unbalanced during the 
dehydration, the washing 
machine will automatically 
correct it, and if it is still invalid 
after two times, it will alarm. 

Open the top cover, place the 
clothes manually and close the 
cover. 

Summary of Contents for CATL 7080 WKI






















Reviews:

No comments