Candy CATL 7080 WKI Instruction Manual Download Page 12 | Manualshive

Page: 12 / 21

Candy CATL 7080 WKI Instruction Manual Download Page 12

12

1. INDICATOR STATUS MEANING

　Aflashinglightindicatesthattheprogramisrunning.

Thelightisontoshowthestatustoberunorselected.

　ThedigitaldisplayflashesquicklyanddisplaysE1~E7andE9,indicatingabnormality.

Whentheprogramisset,thedigitaldisplayshowsthetotalrunningtime.

Thedigitaldisplayshowsthetotaltimeofpresetduringtheprocedure.

Thedigitaldisplayshowsremainingtimeaftertheprogramstart.

2. BUTTON INSTRUCTIONS

1) “ON/OFF” BUTTON

Press the Power “ON/OFF” button to turn on the power or cut off the power.

2). “START/PAUSE” BUTTON

After turning on the power, press the “Start/Pause” button to start or pause the washing machine.

3) “PROGRAM” BUTTON

Normal: routine washing procedure.
Speedy: to wash the slight dirty clothes.
Heavy: washing of larger, thicker clothes.

Water-saving:

water saving washing procedure.

Save water program is the recommended program designed to minimize water

consumption for normally soiled clothing at rated washer capacity.

Soak:

soak for a while before washing.

Strong: washing procedure with strong water flow

ECO:

washing procedure of saving water and electricity.

Spin: procedure for dehydration of clothing only.

Rinse+ Spin: procedure for rinsing and dehydration of clothing only.

Tub-clean: washing machine tub cleaning.

4) “WATER LEVEL” BUTTON

According to how much washing clothes, you can press “

water level

” button to select the

«
...
10
11
12
13
14
...
»

Summary of Contents for CATL 7080 WKI






















Reviews:

No comments