• WARNING: ensure that the appliance is switched
off before replacing the bulb, to avoid the possibility
of electric shocks.
• Only use the meat probe recommended for this
oven.
• Cook the vegetables in a container with a lid
instead of an open tray.
• Avoid leaving food inside the oven after cooking
for more than 15/20 minutes.
• Children under 8 should be kept at a safe distance
from the appliance if not continuously supervised.
• The oven must be switched off before removing
the removable parts. After cleaning, reassemble
them according the instructions.
• During cooking, moisture may condense inside
the oven cavity or on the glass of the door. This is a
normal condition. To reduce this effect, wait 10-15
minutes after turning on the power before putting
food inside the oven. ln any case, the condensation
disappears when the oven reaches the cooking
temperature.
• WARNING: the appliance and accessible parts
become hot during use. Be careful not to touch any
hot parts.
• The appliance can be used by those aged 8 or
over and by those with limited physical, sensorial or
mental capacities, without experience or
knowledge of the product, only if supervised or
provided with instruction as to the operation of the
appliance, in a safe way with awareness of the
possible risks.
• Do not use a steam cleaner for cleaning
operations.
• WARNING: the accessible parts can become hot
when the grill is in use. Children should be kept at a
safe distance.
• Children should not play with the appliance.
• Connect a plug to the supply cable that is able to
bear the voltage, current and load indicated on the
tag and having the earth contact. The socket must
be suitable for the load indicated on the tag and
must have ground contact connected and in
operation. The earth conductor is yellow-green in
colour. This operation should be carried out by a
suitably qualified professional. ln case of
• WARNING: in order to avoid any danger caused
by the accidental resetting of the thermal
interruption device, the appliance should not be
powered by an external switching device, such as a
timer, or be connected to a circuit that is regularly
switched on and off.
• Do not use rough or abrasive materials or sharp
metal scrapers to clean the oven door glasses, as
they can scratch the surface and cause the glass to
shatter.
• Cleaning and maintenance should not be carried
out by unsupervised children.
Safety Indications
EN 02
• Any excess of spilled material should be removed
before cleaning.
• The appliance must not be installed behind a
decorative door in order to avoid overheating.
• WARNING: Do not line the oven walls with
aluminium foil or single-use protection available
from stores. Aluminium foil or any other protection,
in direct contact with the hot enamel, risk melting
and deteriorating the enamel of the insides.
• Failure to comply with the above can compromise
the safety of the appliance and invalidate the
guarantee.
incompatibility between the socket and the
appliance plug, ask a qualified electrician to
substitute the socket with another suitable type.
The plug and the socket must be conformed to the
current norms of the installation country.
Connection to the power source can also be made
by placing an omnipolar breaker between the
appliance and the power source that can bear the
maximum connected load and that is in line with
current legislation. The yellow-green earth cable
should not be interrupted by the breaker. The
socket or omnipolar breaker used for the
connection should be easily accessible when the
appliance is installed.
• lf the power cable is damaged, it should be
substituted with a cable or special bundle available
from the manufacturer or by contacting the
customer service department. The type of power
cable must be H05V2V2-F. This operation should
be carried out by a suitably qualified professional.
The earth conductor (yellow-green) must be
approximately 10 mm longer than the other
conductors. For any repairs, refer only to the
Customer Care Department and request the use of
original spare parts.
• The disconnection may be achieved by having
the plug accessible or by incorporating a switch in
the fixed wiring in accordance with the wiring rules.
• A long power supply failure during an occurring
cooking phase may cause a malfunction of the
monitor. ln this case contact customer service.
• When you place the shelf inside, make sure that
the stop is directed upwards and in the back of the
cavity. The shelf must be inserted completely into
the cavity.
• WARNING: Never remove the oven door seal.
• CAUTION: Do not refill the cavity bottom with
water during cooking or when the oven is hot.
• No additional operation/setting is required in order
to operate the appliance at the rated frequencies.
