C&T Solution ACO-3000-3765U, User Manual

Page: 78 / 97

ACO-3000 l User’s Manual
78
■
Serial Port 4 Configuration

Serial Port
This item allows you to enable or disable serial port.

Change Settings
This item allows you to change the address & IRQ settings of the specified serial port.

Device Type Select
Change the Serial interface. Select <RS232> ,<RS422 Full Duplex> or <RS485 Half Duplex> interface.
Chapter 4: BIOS Setup
■
Watch Dog Function
You can setup the system watch-dog timer, a hardware timer that generates a reset
when the software that it monitors does not respond as expected each time the watch
dog polls it.

Watch Dog Timer Count Mode
Change the Watch dog mode. Select <Second Mode> or <Minute Mode> mode.

Watch Dog Timer Time Out Value
User can set a value in the range of 0 to 255.