C&T Solution ACO-3000-3765U, User Manual

Page: 41 / 97

ACO-3000 l User’s Manual Chapter 2: Switches and Connectors
Step of Setting Power Ignition
Step 1:
To select power ignition by PC/CAR switch.
Step 2:
To select battery input voltage by 12V / 24V switch.
Step 3:
To configure the power off delay time, please check the Delay Time Setting Options in
advance.
Step 4:
To connect the power and ignition power
Example: Delay Time Setting for 5 minutes
1. If delay time set as “5 minutes”
2. The system will shut down 5 minutes
later after turning off the vehicle.
Step 1
Pin 1-2 (Left): PC Power Mode
Pin 2-3 (Right): Power Ignition Mode
Step 2
Pin 1-2 (Left): Battery 24V Input Mode
Pin 2-3 (Right): Battery 12V Input Mode
Switch 1 / 2 / 3 Power off delay time
ON / ON / ON 0 second
ON / ON / OFF 1 minute
ON / OFF / ON 5 minutes
ON / OFF / OFF 10 minutes
OFF / ON / ON 30 minutes
OFF / ON / OFF 1 hour
OFF / OFF / ON 2 hours
Step 3
Step 4
To connect the battery power and
ignition power