127
EXTENDED CONNECTING PINS FOR JETROLL
SPECIFICATIONS
Material/Composition:
High-density polyethylene
Available colors:
Beige and Gray
Dimensions:
L :26.6cm x W: 17.2 cm (6.88”) / Shaft diameter : 4.547 cm (1.819”)
Weight:
377g
Needed tools:
G2 key for pin
TERMINOLOGY
HEAD:
Upper part of the CONNECTING PINS designed with a flat and anti-skid surface.
NOTCH:
Manufactured recess in the pin’s head that allows the tool to insert the key for screwing and unscrewing.
SHAFT:
The male part of our coupling system, the extended threaded shaft, is inserted in the JETROLL’s front tabs.
ASSEMBLY PROCEDURE
1-Initiate the rotating process by hand.
2-When the CONNECTING PIN has access to the JETROLL’s tab threads, proceed by screwing manually or mechanically with the
proper tools.
3-Make sure to securely tighten the CONNECTING PINS until snug, without over-tightening them.
TIPS
1-When initially inserting the CONNECTING PINS in place, you might want to firmly “tap” the pin in place. You ensure a firm “initial”
grip of the shaft threads into the tabs by proceeding so. Likewise, this “tap” helps you get the pin through the cube’s tabs resting on
top of the JETROLL’s tabs.
2-Once the assembly process is completed, align the NOTCHES of the CONNECTING PINS using the manual key. This simple operation
allows to quickly locate any CONNECTING PINS which could have unscrewed over time.
3-Always proceed with caution if using a power drill to fasten the CONNECTING PINS; the drill can tend to “kick”. Use protective
footwear. If using a power drill to unscrew pins, always loosen-up the pins manually before using the drill.
4- Never use an ‘’impact tool’’ to fasten the connecting pins as you will most likely damage the connecting pins as well as the assembly
key for drill.
SKU NUMBERS
EXTENDED CONNECTING PIN BEIGE:
A0093
EXTENDED CONNECTING PIN GRAY:
A0094
