System 236E Installation Instructions
20
Command Location 24: Shunting Enable
2 4
1
1
1
1
1
1
(1) (2) (3) (4) (5) (6)
Default Values
Digit Position (1): Loop 1 Shunting Enable
0 = No: makes this zone a priority zone (not shuntable)
1 = Yes: authorized users can bypass or force arm
Digit Position (2): Loop 2 Shunting Enable
Refer to Digit Position (1) for programming options.
Digit Position (3): Loop 3 Shunting Enable
Refer to Digit Position (1) for programming options.
Digit Position (4): Loop 4 Shunting Enable
Refer to Digit Position (1) for programming options.
Digit Position (5): Loop 5 Shunting Enable
Refer to Digit Position (1) for programming options.
Digit Position (6): Loop 6 Shunting Enable
Refer to Digit Position (1) for programming options.
Command Location 25: Delay Before Dial Enable
2 5
0
0
0
0
0
0
(1) (2) (3) (4) (5) (6)
Default Values
Digit Position (1): Loop 1 Delay Before Dial Enable
0 = No
1 = Yes: this loop will delay dialing on alarm for time programmed in CL 1B (4)
Digit Position (2): Loop 2 Delay Before Dial Enable
Refer to Digit Position (1) for programming options.
Digit Position (3): Loop 3 Delay Before Dial Enable
Refer to Digit Position (1) for programming options.
Digit Position (4): Loop 4 Delay Before Dial Enable
Refer to Digit Position (1) for programming options.
Digit Position (5): Loop 5 Delay Before Dial Enable
Refer to Digit Position (1) for programming options.
Digit Position (6): Loop 6 Delay Before Dial Enable
Refer to Digit Position (1) for programming options.
CL 24 - 25
