C&H GKH18K3BI, Owner'S Manual

Page: 10 / 39

9 Unit off display
10 Clock display
11 Confirm button
12 Increase button
13
Decrease button
14
Cacel/delete button
15
Single/group button
16
Timer/time button
17
ON/OFF button
Unit Function
• 7DP - Seven days programmer (Accessory not supplied)
Centralized Control and Week Timer
Functions: The centralized control- ler
and the weekly timer are integra- ted in
the same wire controller. The system
has both the centralized control
and the week timing functions. Up to
16 sets of units can be control- led
simultaneously by the centralized
controller (weekly timer). The weekly timer has the function of invalidating
lower unit. The weekly timing function
is able to realized four timing ON/OFF
periods for any unit every day, so as to
achieve fully automatic operation.
This WEEKLY TIMER adopts 485
mode to communicate with manual
control of every duct type unit, and it can
control up to 16 units. Adopting 2-core
twisted-pair wire, the longest
communication distance of this TIMER
is 1200m. After connected to power, the
WEEKLY TIMER can display all
connected units (sequence of unit is
determined by code switch of manual
control of every duct type unit). On and
off of every duct type unit can be done
through the Timer On / Off of this
WEEKLY TIMER, and the button shield
operation of manual control can be done
through shield setting on WEEKLY
TIMER. Mode selection and temperature
adjustment and other operations are done
through the manual control at every unit.
Arrangement
1 Unit dispaly
2 Single/group display
3
Timer week display
4
Timer display
5
Timer state display
6 Timer time period display
7 Timer ON/OFF time display
8 Unit on display