In timing setting mode, press MODE button to select
any desired setting object: Week (1-7), timer interval
(1-4), timing (Timer on or Timer off time), min. part or
hour part of time, and then press
▲ or ▼ button to
adjust this object, which is fixed by pressing TIMER
button or can be canceled by pressing Timer again.
During fixing setting there must be blinking characters.
During canceling setting, if there are also blinking
characters, setting can be continuous till quit It by
pressing ON/OFF button; meanwhile, timing data are
memorized. (Fig.10, 11)
In time setting mode press MODE button to select any
desired setting object: Week (1-7), min. part (0-59)
or hour part (0-23), and then press
▲ or ▼ button to
adjust this object, which is fixed by pressing TIMER
button or can be canceled by pressing Timer again.
During fixing setting there must be blinking
characters. During canceling setting, if there are also
blinking characters, setting can be continuous till quit
It by pressing ON/OFF button.(Fig.12)
Fig.10
Fig.11
Fig.12
Summary of Contents for GKH18K3BI
Page 24: ...Outdoor Unit Installation INSTALLATION INSTRUCTIONS Fig 31 Fig 32 CAUTION ...
Page 32: ...PIPE PREPARATION OPERATION INSTRUCTIONS ...
Page 34: ...AIR PURGING AND CHECK OF PIPE LEAKAGE OPERATION INSTRUCTIONS ...
Page 35: ...LIQUID PIPE AND DRAIN PIPE OPERATION INSTRUCTIONS ...
