C&H GKH18K3BI, Owner'S Manual

Page: 13 / 39

1) ON/OFF
（
Fig.2
）
Press the
“
ON/OFF
” button, the unit will start running.
Press the
“
ON/OFF
” button again, the unit will stop
running.
2)
Fan Control (Fig.3 is about display region and the
same as following figures.)
When press FAN button once, the fan speed will be
changed as follow:
In DRY mode: the fan speed will be set at low automatically.
3) Temperature Setting (Fig.4)
Press the setting temperature button:
▲
：
For temperature increase
▼
：
For temperature decrease
（
Press this button once, the temperature will be increased
or decreased by 1.
）
Note: Press
▲+ ▼button for 5 seconds, “EE” will
appear where SET TEMP is displayed and all buttons are
shielded. Press
▲+▼button again for 5 seconds to
cancel locked function.
If long-distance monitoring controller or central controller
shield displayer, all buttons and signals from remote
controller will be shielded too, and CC will be displayed
where SET TEMP is displayed.
Fig.2
Fig.
3
Fig.
4