Operation of wireless remote control
Names and functions of wireless remote control
Notice: This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model dosen't have, if press the
corresponding button on the remote controller that the unit will keep the original
running status.
TIMER
Remote control
+
-
7
TIMER button
● By pressing this key under switch-off state, you may
set the time for auto switch-on. The range of setting is 0.5
~ 24 hours. The characters "T-ON" and "H" will flash for 5
seconds. Within 5 seconds,you may make one press of
this key to complete the setting and send the message.If
the setting is valid the set time will be displayed for 2
seconds before display of the temperature message
During flash, you may press "+" key to increase the
value and press "-" key to decrease the value. The time
will increase or decreas by 0.5 hours with each press of
this key. If pressing "+" or "-" key continuously, the time
value will change rapidly. The remote controller can
increase the set time by 0.5 hours every 0.25 seconds.
After being energized, the fault is no timer setting, and
there is no display of "T-ON" or "H". ON/OFF Press key
to switch on the unit and cancel the auto switch-on.When
the temperature display becomes constant, you may
press this key again to display the remaining set time.
The time value, "T-On" and "H" will display constantly for
2 seconds. After 2 seconds,the preset temperature will
be displayed. Within these 2 seconds, you may press this
key again to cancel the auto switch-on and send the
message.
● By pressing this key under switch-on state, you may
set the time for auto switch-off. The method of setting as
the same as for auto switch-on.
+ button
● For presetting temperature increasing. Press this
button,can set up the temperature, when unit is on .
Continuously press and hold this button for more than 2
seconds, the corresponding contents will be changed
rapidly, until unpress the button then send the information,
℃
（
o
F
）
is displaying all along. In Auto mode, the
temperature can not be set up, but operate this button can
send the signal. Centigrade setting range :16-30;
Fahrenheit scale setting range 61-86.
- button
● Presetting temperature can be decreased.Press this button,
the temperature can be set up, continuously press this button
and hold for two seconds, the relative contents can quickly
change, until unhold this button and send the order that the
℃
(
o
F
) signal will be displayed all the time. The temperature
adjustment is unavailable under the Auto mode, but the order
can be sent by if pressing this button.
