Operation of wireless remote control
Names and functions of wireless remote control
Note: Be sure that there are no obstructions between receiver and remote controller;
Don't drop or throw the remote control; Don't let any liquid in the remote control and
put the remote control directly under the sunlight or any place where is very hot.
Signal transmitter
SLEEP
Remote control
FAN
ON/OFF
MODE
SWING
6
▲
SLEEP button
● Press this button, Sleep On and Sleep Off can be
selected. After powered on Sleep Off is defaulted. After
the unit is turned off, the Sleep function is canceled.
AfterSleep function set up, the signal of Slee will display.
In this mode, the time of timer can be adjusted. Under
Fan and Auto modes, this function is not available.
FAN button
● By pressing this key, you may select AUTO FAN 1,
FAN 2, FAN 3 or FAN 4, and may also cycle between
them. FAN 4 only in cool or heat mode. After being
energized, AUTO is defaulted. Only LOW fan can be
set under DRY mode, pressing this key can not adjust
the fan speed, but can send message.
Fan 1
Fan 2
Fan 3
Fan 4
ON/OFF button
● Press this button, the unit will be turned on,
press it once more, the unit will be turned off.
When turning on or turning off the unit, the Timer,
Sleep function will be canceled, but the presetting
time is still remained.
MODE button
● Press this button, Auto, Cool,Dry, Fan, Heat
mode can be selected circularly. Auto mode is
default while power on. Under Auto mode,the
temperature will not be displayed; Under Heat
mode, the initial value is 28
℃
(82
o
F
);Under other
modes, the initial value is 25
℃
(77
o
F
).
AUTO
COOL
DRY
HEAT
FAN
AUTO
COOL
DRY
FAN
HEAT
(Only for cooling and heating unit.)
SWING button
● Press this key to activate or deactivate the swing.
▲
▲
▲
▲
