2
PAGE
Unpacking / Inspection
2
Safety Guide
2
Proper Installation
3
Specification 4
Before Starting Installation
4
Sizing Requirement
7
Installation Instructions
8
System Start Up
10
Programming Instructions
11
About The System
12
Maintenance 13
Main Repair Parts
16
Trouble Shooting
21
Warranty 22
Table of Contents
Safety Guide
Check and comply with your provincial /
state and local codes. You must follow
these guidelines.
Use care when handling the filter tank. Do
not turn upside down, drop, drag or set on
sharp protrusions.
The system works on 12 volt-60 Hz electri-
cal power only. Be sure to use only the
included transformer.
Transformer must be plugged into an in-
door 120 volt, grounded outlet only.
WARNING
: This system is not intend-
ed for treating water that is microbiologi-
cally unsafe or of unknown quality without
adequate disinfection before or after the
system.
For your safety, the information in this manual must be followed to minimize the risk of
electric shock, property damage or personal injury.
Be sure to check the entire unit for any shipping damage or parts loss. Also note damage to
the shipping cartons. Contact the transportation company for all damage and loss claims.
The manufacturer is not responsible for damages in transit.
Small parts, needed to install the softener, are in a parts bag. To avoid loss of the small
parts, keep them in the parts bag until you are ready to use them.
Unpacking / Inspection
Summary of Contents for 765 Series
