Canature WaterGroup Hydrotech 485HE, Owner'S Manual

Page: 35 / 36

34 35
PROBLEM
EXCESSIVE PRESSURE LOSS
Peak or continuous service flow rate may be exceeding capacity
causing the unit to be restrictive due to size.
1. Check unit specifications to ensure proper sizing for the application.
2.
Degradation of resin due to chlorine or chloramine.
.
Replace the resin bed.
HALL SENSOR - ERROR CODE
Power surge.
Unit is in normal home position showing ‘Hall Sensor Error’.
1. Unplug for one (1) minute.
2. Plugin.
3. Initiate Manual Regen if the error reoccurs .
Circuit failure.
Transformer or motor failure – unit will NOT be in the home position; water may be
running at the drain.
1. Replace the motor and transformer if unable to determine the output of the
transformer separately.
2.
Contact your authorized installer for parts and or assistance.
COMMON SPARE PARTS
Part Number Description
60090003 QC Valve connector one (1) inch straight with O-ring
60090006 QC Valve connector three-quarters (3/4) inch straight with O-ring
60090010 QC Valve connector three-quarters (3/4) inch elbow with O-ring
60010025 Locking clip large
60010069 Locking clip small
60010006 Bypass tool
60010052 Transformer 12 volt
60010382 Problem water injector kit
92360 100% silicone-based lubricant
50033 Sani-System liquid concentrate – 1 packet
99003 Media Funnel
80050083 HACH Water Hardness Test Strips 50 per bottle
TROUBLESHOOTING GUIDE
(CONTINUED)