background image

4000 AVE. PINARD, 

ST-HYACINTHE, 

QUÉBEC, CANADA, 

J2S 8K4, 

TEL: 450-383-4000, 

FAX: 450-383-4004 

www.ventecventilation.com

 

Sept. 8, 2016 

       PAGE 4 OF 17 

REV 4 

1.4

 

PRODUCTS RECEPTION 

We recommend you to receive this system in a coordinated and verified manner, in order to avoid lost time due 

to misplaced equipment. 

The Cyclone is shipped in one skid. 

Wood blocks between all propellers 

and housing 

Figure

 

3

 

Ā

 

Packing

 

of

 

the

 

Cyclone

 

Plus

 

The main units are: 
1. Cyclone Plus: fan, motor, belts, sheaves, and framing are shipped as one piece and no further assembly is

required. 

 

Package weight is 450 lbs; 

 

Weight 375 lbs without packaging and skid; 

 

Skid sizes are roughly 3

8

 H. 

2. The deflectors, mounting hardware and deflector mounting brackets are shipped with the fan and require

assembly. 

3.

Optional mounting units (purchased separately):

a.

Ceiling Hung Unit (Package weight is 50 lbs);

b.

Wall or Post Mounting Unit (#

FGCY-MNTKIT

) (Package weight is 200 lbs);

c.

30deg Angle Union for one direction airflow.

IMPORTANT NOTE: there is a piece of wood at the end of each propeller.  They have to stay in place until the end 

of the installation in order to provide the correct gap between the propellers and the housing. 

PUTTING INNOVATION TO WORK

7686 16 Line, Arthur, ON. 

N0G 1A0 

Email: [email protected] 

Tel: 1-800-263-5314 

Fax: 519-848-3948 

www.canarm.com

Summary of Contents for AgSystem CYCLONE PLUS




















Reviews: