3
4
In case of a fire
Turn off Grid Circuit Breaker.
Turn off the PV connection.
Turn off EP Cube. (Refer to Page 11)
Acceptable fire extinguisher types are carbon dioxide-based fire extinguishers,
standard ABC fire extinguishers, and dry chemical fire extinguishers.
•
•
•
•
In case of flooding
Stay out of the water if any part of the Battery Module, Hybrid Inverter, or wiring is
submerged.
Turn off EP Cube. (Refer to Page 11)
If possible, protect the system by finding and stopping the source of the water and
pumping water away.
If the EP Cube service team has confirmed that it is safe to re-energize, let the area
dry completely before use.
•
•
•
•
In case of an unusual smell or smoke from EP Cube
Turn off the Grid Circuit Breaker.
Turn off the PV switches.
Turn off EP Cube. (Refer to Page 11).
Clear the area around the Hybrid and Smart Gateway.
Ventilate the room.
•
•
•
•
•
In case of EP Cube making unusual noises
Turn off the Grid Circuit Breaker.
Turn off the PV switches.
Turn off EP Cube. (Refer to Page 11).
Ensure that ventilation fan area is clear.
•
•
•
•
SAFETY INSTRUCTIONS
CAUTION
The transportation, installation, and commissioning of the EP Cube must be carried
out under the specified conditions. Do not expose EP Cube outside these specified
conditions.
EP Cube can only be installed, repaired, replaced, and maintained by licensed
authorized personnel for safety and warranty purposes. Personnel must wear protective
equipment during any operations.
Do not place foreign objects on top of the product or insert them anywhere in the
product. Make sure there is enough space on top of EP Cube for ventilation.
Do not stack battery modules more than the specified quantity or reverse the polarity
of the battery.
Be careful to protect EP Cube from impact when installing EP Cube in a garage or near
vehicles.
Operating or placing in high temperatures, and near heating equipment or sources of
extreme heat will cause the battery modules to be thermally unstable, thereby exceeding
the thermal runaway point of its material and potentially causing a fire.
•
•
•
•
•
•
Emergency Procedures
If any fault is found that may cause personal injury or product damage, the operation
shall be terminated immediately, and effective protective measures shall be taken.
1.
2.
Notify all people who might be affected and ensure that they are able to evacuate the area.
Immediately contact the fire department or other relevant emergency response team.
SAFETY INSTRUCTIONS
