CanadianSolar CSI-125KTL-GS-E Installation And Operation Manual Download

Page: 32 / 43

6. Normal operation

.61.

.60.

Figure 6.44

Selecting “Fan Test” displays the sub-menu shown below:

Are

you

sure

YES

ENT

ESC

Fan Test is a factory test function.

Press the ENTER key to start the test.

Press the ESC key to return to the previous menu.

6.7.14 DSP Update

The function is used for update the DSP.

This function is applicable by maintenance personnel only, wrong operation

will prevent the inverter from reaching maximum power.

6.7.15 Compensation Set

The

screen

shows

Figure 6.45 Power Rate Limit

Press the Down key to move the cursor

Press the Up key to change the digit

Please press the Enter to save the setting and press the ESC key to return to the previous menu

This setting is used for grid operators, do not change this setting unless

specifically instructed to.

This function is used to calibrate inverter output energy and voltage. It will not impact the

energy count for inverter with RGM.

Two sections are included: Power Parameter and Voltage Parameter.

YES=<ENT> NO=<ESC>
Power

para

000

6.7.12 Debug Parameter

6.7.13 FAN Test

This section is applicable to maintenance personnel only.

Figure 6.43

Debug

Parameter as shown as below:

This section is applicable to maintenance personnel only.

Press the UP/DOWN keys to scroll through items. Press the ENTER key to select

Press the DOWN key to scroll and press the UP key to change the value.

Press the ENTER key to save the setting.

Press the ESC key to cancel changes and return to the previous menu.

→

S16DAT1: +0000
S16DAT2: +0000
S16DAT3: +0000
S16DAT4: +0000
S16DAT5: +0000
S16DAT6: +0000
S16DAT7: +0000
S16DAT8: +0000

Summary of Contents for CSI-125KTL-GS-E












































Search results

Summary of Contents for CSI-125KTL-GS-E

Reviews:

Related manuals for CSI-125KTL-GS-E

Brands by name

Popular brands

CanadianSolar CSI-125KTL-GS-E, Installation And Operation Manual

Search results

Summary of Contents for CSI-125KTL-GS-E

Reviews:

Related manuals for CSI-125KTL-GS-E

Brands by name

Popular brands